Volvo FH500 - FALKOM FAW 25.000 - !! Viewing by appointment only !! tow truck
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Netherlands 
4,178 kg
Netherlands, Drachten
5,760 kg
Netherlands, Groot-Ammers
15,300 kg
Netherlands, Dongen
16,777,200 kg
Netherlands, Erp
605 kg
Netherlands, Drachten
10,331 kg
Netherlands, Drachten
4,530 kg
Netherlands, Terneuzen
12,900 kg
Netherlands, Vriezenveen
27,325 kg
Netherlands, Drachten
Netherlands, Ravenstein
6,640 kg
Netherlands, Ede
4,591 kg
Netherlands, Veghel
Netherlands, Belfeld - Venlo
7,860 kg
Netherlands, Veghel
13,945 kg
Netherlands, Ede
5,130 kg
Belgium, Meer
17,700 kg
Netherlands, Gilze
Germany, Harrislee
8,000 kg
Netherlands, Andelst
- 2 Bedden
- Cabinezijfenders
- Climate Control (ATC)
- Elektrisch spiegels
- Lane Change Support
- Oliekoeler
- SMART TACHO 2
- Standkachel
- Verstralers op het dak
- Volvo Dynamic Steering
- WhatsApp show contacts
- Zwaailampen
= Remarks =
Falkom wrecker installation type FAW 25.000
- One main arm.
- A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
- A fully hydraulic installation consisting of:
- hoses
- couplings
- pipes
- 8-function valve block
- Two double-acting lifting cylinders take care of the up and down movement of the main arm.
- The installation is also executed with a so-called "Powertilt" installation to minimize damage to spoilers e.d.
- The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
- 2 anchors model working independently of each other standard.
- A lift beam (100 x 100 mm tube).
- Three sets of fork holders.
- 4 sets of V forks.
- 1 Set of chain forks.
- 1 Set of euro forks (German version 1 set of euro forks model small and 3 set for axle forks).
- Set of Scania claws with mounting brackets on the lift beam.
- Set of air suspension forks.
- 1 bus frame.
- Tow bar mounted.
- Shovel and broom mounted.
- Oil tank.
- Pulling device with trawler in combination with a semi-trailer link.
- Supported drawbar coupling support.
- Two 20 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
- Hydraulic double pump.
- Radio remote control for all functions, excluding anchor shovels
- Complete installation is stacked / metallized.
- Built according to CE guidelines.
- Assembly of the air hands and electrical connections of the truck at the rear in the body.
- Luxury enclosure in aluminum version highly adapted to the 8x4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
- LED light bar mounted on the flyer.
- Lighting control switches mounted in the control box and in the cabin.
- LED flash lamps mounted at the rear.
- 6 work lights mounted (under the flyer, high at the rear and low).
- LED lamps mounted on the corners of the enclosure.
- Starting aid 12/24 volts.
- Air reel mounted.
- Spray the installation in finish.
- 7-wire electrical cable reel installed.
- Container for counterweight mounted behind the cab.
- Base plate for lateral stability (standard legs only)
- 2 fork raisers
- 2 pieces of anchor plates for Wheel chocks
- Two WLL 15 tonne folding discs
- European approved buffer beam at the rear.
- Pulling device with pin 40, 50 and 60 mm
- 2 models towing eyes.
- RDW inspection and, if necessary, TüV.
- Ballast under the bumper.
= More information =
Cab: Globetrotter, single
Axle 1: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering; Suspension: leaf suspension
Axle 2: Tyre size: 385/65 R22.5; Max. axle load: 9000 kg; Steering; Suspension: leaf suspension
Axle 3: Tyre size: 315/70 R22.5; Max. axle load: 9500 kg; Reduction: hub reduction; Suspension: air suspension
Axle 4: Tyre size: 315/70 R22.5; Max. axle load: 9500 kg; Reduction: hub reduction; Suspension: air suspension
APK (MOT): tested until 01/2027
Registration number: 28-BPD-3